Setting LOW IDLE Speed and HIGH IDLE Speed on Caterpillar ET Software
LOW IDLE SPEED and HIGH IDLE SPEED
 |
| Figure 1.1 - Low Idle Speed (Murphy PowerView) |
HIGH IDLE SPEED
1). Connect CAT ET Software, click on menu "Service" then "Configuration Tool". Read More: How to Connecting Caterpillar ET Software to the ECM.
- Expand All, click on "Engine/Gear Parameters", then "High Idle Speed"
 |
| Figure 1.2 - Change Parameter Value (High Idle Speed) |
- Input "New Value" and click "OK", then click "Yes".
 |
| Figure 1.3 - Click "Yes" |
 |
| Figure 1.4 - High Idle Speed (2100 Rpm) |
LOW IDLE SPEED
With the same way, click on "Low Idle Speed", and input "New Value", then click "OK".
 |
| Figure 1.5 - Change Parameter Value (Low Idle Speed) |
Blog.Teknisi
0 Response to "Setting LOW IDLE Speed and HIGH IDLE Speed on Caterpillar ET Software"
Post a Comment