Check the Electric Cooling Fan on Radiator using TECHSTREAM (TIS Software)

Control the Electric Cooling Fan

Figure 1.1 - Control the Electric Cooling Fan

Baca juga:

FREE Registration Key for TECHSTREAM v12.20.024

FREE Registration Key for TECHSTREAM v12.00.127

FREE Registration Key for TECHSTREAM v13.00.022

• Connecting MINI-VCI adapter to OBDII Diagnostic Port on your Car. Read More: Install MINI-VCI J2534 Driver untuk TECHSTREAM (Toyota TIS) Software
• Once connected, click "Engine and ECT" on "System Selection Menu".

Figure 1.2 - Engine and ECT

• Click "Active Test" on the left-side menu, and "Active Test Selection" displayed as Figure 1.1 above.
• Choose "Control the Electric Control Fan", then click "OK".

Figure 1.3 - Control OFF

-This test activates the Electric Cooling Fan (Motor Fan Pendingin Otomatis).
-Command: ON/ OFF
-Operate with Ignition ON, Engine OFF, Shift Selector in P (AT) or Neutral (MT).

• Click on ">" to activate (ON) the Electric Cooling Fan, and please check the Electric Cooling Fan (Motor Fan Pendingin Otomatis) on Radiator will spinning. Click on "<" to deactivate (OFF), and the Electric Cooling Fan will stop.

Figure 1.4 - Control ON

• Simulation uploaded to Youtube channel: Blog Teknisi, as below;

NOTE: When Cooling Fan operation at high temperature: on 93 °C or 199 °F (ECM will received signal from Engine Coolant Temperature/ ECT Sensor), Cooling Fan will automatically works until engine temperature on 83-90 °C.

Read More: Monitoring Engine Coolant Temperature (Suhu pada Mesin Mobil) dengan Menggunakan ELM327Car Scanner.

Read More:
Cylinder Fuel Cut Test using TECHSTREAM (TIS) Software
Monitoring Parameter Data List on Your Car (Real Time) using TECHSTREAM (TIS Software)

Blog.Teknisi

Subscribe to receive free email updates: