Using Segment and Reset on Caterpillar ET Software
Segment and Reset
 |
| Figure 1.1 - Trip Segment (Driver and Fleet) |
1). SEGMENTS
The "Segment" function allows performance parameters and totals accumulated to
be viewed.
-Different parameters display for the data analysis.
-Trip Segment functions and data currently available on various products
are:
- Driver – data collected from the time the engine is turned on until it is turned off
- Fleet – data collected from the time the fleet job begins. This data is continuous until it is reset. As a result, the data is a collection of overall fleet work, not just the fleet work performed by one driver.
- Current (Field) – most current data collected since the current totals were rest. This information is then compared with the previous totals.
- Previous – the reset current field totals (deleting the previous field totals). This function allows a comparison between the tractor’s performance on two different fields. Each time this data is taken, the "new" previous field totals overwrite the "old" previous field totals.
- Rolling – data collected throughout a particular period. These rolling totals are independent of the field totals.
- Lifetime – data collected throughout the lifetime of the machine. Lifetime parameters cannot be reset.
- Job – latest data collection since the job totals were reset. Once the job is reset, this information is deleted.
- Trip – latest data collection since the trip totals were reset.
Job Segment functions currently available on various products are (refer to Figure 1.1 above):
- Driver – data collected from the time the engine is turned on until it is turned off
- Fleet – data collected from the time the fleet job begins. This data is continuous until it is reset. As a result, the data is a collection of overall fleet work, not just the fleet work performed by one driver.
#Accessing
To run the Segment data, select "Trip Segment" from the "Information" menu, and then
select an option from the submenu. The selected "Segment" screen is displayed.
 |
| Figure 1.2 - Trip Segment (Driver) |
 |
| Figure 1.3 - Trip Segment (Fleet) |
#Display Area
The Segment display area has three columns:
- Description – Provides the name of the parameter set to run the test.
- Value - Displays the status of the current parameter
- Unit - Displays the parameter units.
2). RESET
 |
| Figure 1.4 - Trip Reset (Driver and Fleet) |
The "Reset" function allows recorded data to be completely cleared so that a
new series of data records may be begun. The data is the same
in both the "Segment" function and the "Reset" function. "Reset" functions currently available on various products include:
- Driver
- Fleet
- Field (Current)
- Rolling
- Job
- Trip
To run the Reset function:
- Select "Reset" from the "Information" menu, and then select a "Trip Reset" option from the submenu. The "Do you want to continue?" message box is displayed. Note: "Customer Passwords" may be required to perform the "Reset" function.
 |
| Figure 1.5 - Do you want to continue? |
- Click "Yes" to clear all the data. The "...data is successfully reset" message box is displayed. Click "OK". The "Reset" screen is displayed.
 |
| Figure 1.6 - Trip data is successfully reset |
Blog.Teknisi
0 Response to "Using Segment and Reset on Caterpillar ET Software"
Post a Comment