#1003840 Validations Failed - Customer Programming Software (CPS 2.0)
#Motorola CPS 2.0
#MOTOTRBO CPS
#MOTOTRBO Software
#Motorola CPS Software
#MOTOTRBO Download
#Motorola CPS Download
#Motorola Codeplug Download
#MOTOTRBO CPS 2.0 Download
#Motorola Professional Radio CPS
#Motorola APX CPS Software Download
#Motorola Radio Programming Software
#Motorola Programming Software Download Free
 |
| Figure 1.1 - Validations failed |
Restricted Access to System (RAS) - Security
→Validation Results |
| Figure 1.2 - Validation Results (Error Code: 20670004) |
The Restricted Access to System (RAS) section of the Security set contains the following fields:
→General - Security - Restricted Access to System (RAS)
 |
| Figure 1.3 - Restricted Access to System (Security) |
→Configures the Restricted Access to System (RAS) mode that the system will operate on. RAS is disabled in Connect Plus mode.
b). Add (RAS Alias)
→The Restricted Access to System (RAS) feature provides the capability of preventing invalid subscriber users from using the repeater to transmit in a system.
c). Delete (RAS)
→Key Alias and Key Value may be deleted if they are no longer in use.
d). Authentication Key Alias
→This feature allows the user to choose the alias that will be used in the application for the RAS Key for this repeater.
e). Key Alias
→Configures an alias for the respective Restricted Access to System (RAS) ID to easily identify the ID.
f). Key Value
→Configures a Restricted Access to System (RAS) ID on subscribers.
g). Authentication Key (RAS)
→Configures the Restricted Access System (RAS) ID on repeater.
h). Radio ID Range Check
→The Restricted Access to System (RAS) feature provides the capability of preventing invalid subscriber users from using the repeater to transmit in a system.
i). Add (Radio ID Range)
→Adds a Radio ID range and choose whether or not to allow access to that range.
j). Delete (Radio ID Range)
→Radio ID Ranges may be deleted if they are no longer needed.
k). Min Radio ID
→Defines the start value of a range of Radio IDs to be used in the Radio ID Range Check method of system access protection.
l). Max Radio ID
→Defines the end value of a range of Radio IDs to be used in the Radio ID Range Check method of system access protection.
m). Allow
→Configures whether or not to allow the given range of Radio IDs to access the system, if the ID checking is enabled.
#Key Value
 |
| Figure 1.4 - Key Value |
→RAS ID is 6-24 unicode characters including 0-9, A-Z, a-z, hyphen "-", underscore "_", dollar "$" and pound "#".
→All radios and repeaters have default RAS Key Alias and Key Value. All digital channels (both initial and added channels) are defaulted to the default keys. The default key is 000000.
*Note: This feature value is reset to the default value if less than six characters are entered. This feature is supported in Digital mode only.
#RAS Alias
 |
| Figure 1.5 - RAS Alias |
→This feature configures a digital personality to be connected to a specific RAS ID (identified via Key Alias in CPS 2.0).
→When a RAS ID is connected to a specific digital personality, that personality is considered to be RAS-enabled; otherwise, the personality is RAS-disabled.
→All radios and repeaters have default RAS Key. All digital channels (both initial and added channels) are defaulted to the default keys. The default key is 000000. To disable RAS, go to Authentication (RAS) and select Disable. For radios, select the channel in the Radio, and browse to None.
*Note: This feature is supported in Digital mode only.
#Over-the-Air Programming
The Over-the-Air Programming (OTAP) section of the Security set contains the following fields:a). Authentication Key ID
→This field allows the user to select Key ID for Over-the-air Programming.
b). Authentication Key Value
→This field allows the user to select Key Value for Over-the-air Programming.
c). Authentication Key Alias
→This field allows the user to select Key Alias for Over-the-air Programming.
 |
| Figure 1.6 - Writing Codeplug (RAS) |
Read More:
Blog.Teknisi
0 Response to "#1003840 Validations Failed - Customer Programming Software (CPS 2.0)"
Post a Comment