Head-Up Display (HUD P6)

Figure 1.1 - HUD P6 Display (Interface #1)

Car HUD Smart Gauge for Car

→Simply connect the Head-Up Display (HUD) with the On-Board Diagnostic interface (OBD2) through the OBD cable, and the Head-Up Display (HUD) will display when the car Engine starts.

→Connect the USB cable to the USB interface.

OBD2 Mode: Speed, Clock, RPM, Water Temperature, Voltage, Fuel Consumption, Water Temperature Alarm, Driving Time, Driving Distance, Brake Test, Turbo, Data Stream, Clear Fault Code, RPM Alarm, Accelerator Test, Oil Temperature, Buzzer Mark, KM/MPH Switch, Speed Alarm, Voltage Alarm, and Fatigue Alarm.

(A). Button Functions

Short Press (1 second)

Long Press (2 seconds)

1). Short press "<" / "Right" Key

→Switch language and system on first use

→Switch function display after normal display

→Decrease the menu or parameter value after entering the setting

2). Short press "OK" / "OK" Key

→Select function

→Switch the display screen after normal display

3). Long press "OK" / "OK" Key

→Enter settings

→After adjusting, long press again for 2 seconds to save and exit

4). Short press ">" / "Left" Key

→Switch language and system on first use

→Switch function display after normal display

→Increase the menu or parameter value after entering the setting

(B). Display Functions Abbreviations

ECT= Engine water temperature

RPM= Engine speed

DIS= Travel distance

A/F= Air-fuel ratio

RTC= Satellite time

DIR= Driving direction

ELD= Engine load

VLT= Voltage

TIM= System time

MAP= Intake pressure

TCP= Turbo pressure

ASL= Altitude

KM/L= Kilometers per liter

IAT= Intake air temperature

FUE= Fuel consumption

MIN= Travel time

OIT= Oil temperature

GPS= Satellite number
CVT= Transmission temperature

TPS= Throttle

(C). Setting Mode

→Long press the "OK" key for 2 seconds to enter the Settings item

Figure 1.2 - Settings Mode

→Short press the ">" key to increase the Menu options

→Short press the "OK" key again to enter the parameter value

→Short press the ">" or "<" key to adjust the parameter value

→Short press the "OK" key to confirm and return the Menu

→Long press the "OK" key for 2 seconds to Save and Exit

#Settings

Figure 1.3 - Settings

→Language Set: CN-Simplified Chinese/ TW-traditional Chinese/ EN-English

→Sound Switch: ON-turn on the alarm/ OFF-turn off the alarm

→Speed Alarm: Alarm when the vehicle speed >150km/h, the setting range is 50-200

→Coolant Alarm: Alarm when the water temperature >120°C, the setting range is 50-200

→RPM Alarm: Alarm when the Engine speed >6000r/min, the setting range is 1000-8000

→BAT Alarm: Alarm when the voltage <10.5v, the setting range is 10.0-15.0v

→Speed Adjust: Adjust the parameter value when there is an error between the speed and the instrument panel (for example, the instrument displays 100km/h and the device displays 105km/h, and the parameter value is adjusted to 102 on the dial).

→Speed Offset: when the vehicle speed does not return to 0 after the car is turned off (If the vehicle speed shows 5km/h, the equipment is adjusted to 6km/h).

→BAT Adjust: when there is an error between the voltage and the instrument panel voltage, fine adjustment can be made (If the device displays 0.2v higher than the instrument voltage, the device is adjusted to 98%).

→Engine Size: when the fuel consumption error is large, adjust according to the displacement (If the car displacement is 3.6L, adjust the parameter value to 3.6L).

→Fuel Adjust: fine-tuning when there is an error in fuel consumption (If the device displays 0.2L higher than the instrument voltage, the device is adjusted to 98%).

→Brightness: Auto= automatic light sensitivity, 1= the darkest, 8= the brightest

→Atmosphere: ON= turn on, OFF= turn off

→CWT Unit: °C =Celsius, °F = Fahrenheit

→Speed Unit: Km/h= kilometers, MPH= miles

→Sum Distance: synchronization of total mileage (For example, the total odometer on the dashboard shows that you have driven 30010km, adjust the parameter value to 30010km).

→Power Off Time: the default is 10s to shut down, when it is turned off while driving, it can be adjusted to more than 180s.

→Sleep Voltage: adjust to 13.2 or 13.6 voltage shutdown mode when unable to shutdown RPM is the default speed for shutdown, COM is the automatic start-stop mode and special mode for hybrid electric vehicles.

→Time Adjust: it can be adjusted to local time, the default time is China time (GMT+8).

→Factory Set: the system restores to the factory preset values. After selecting this operation, short press "OK" key to confirm.

#OBD diagnose

Figure 1.4 - OBD diagnose

→Scan DTCs: scan whether the car is faulty and display the fault information

→Clear DTCs: when the car has a fault code display, short press "OK" key to clear the fault code

→Auto Clean: automatically clean the fault code

(D). Display Interface

10 kinds of display interfaces, freely switch

→Interface #1 (refer to Figure 1.1 above) = Speed + RPM + Voltage + Turbo + Driving Distance + Compass + Clock

→Interface #2

Figure 1.5 - HUD P6 Display (Interface #2)

→Interface #3 = Speed + RPM + Water Temperature + Voltage + Turbo + Driving Distance + Compass + Clock

Figure 1.6 - HUD P6 Display (Interface #3)

→Interface #4 = Speed + RPM + Water Temperature + Turbo + Compass + Clock

Figure 1.7 - HUD P6 Display (Interface #4)

→Interface #5 = Speed + RPM + Turbo + Compass + Clock

Figure 1.8 - HUD P6 Display (Interface #5)

→Interface #6 = Turbo + Speed + Compass + Clock

Figure 1.9 - HUD P6 Display (Interface #6)

→Interface #7

Figure 2.1 - HUD P6 Display (Interface #7)

→Interface #8 = Accelerator Test

Figure 2.2 - HUD P6 Display (Interface #8)

→Interface #9 = Brake Test

Figure 2.3 - HUD P6 Display (Interface #9)

→Interface #10 = Data Stream/ PID

Figure 2.4 - HUD P6 Display (Interface #10)

Check the VSV (Vacuum Switching Valve) using TECHSTREAM (TIS) Software

Check the Magnetic Clutch on A/C Compressor using TECHSTREAM (TIS) Software

Blog.Teknisi